Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 8th February 2012, 03:41 PM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default Suspension Bolt Group Buy

We haven't had a group buy for a while and I am in need of some new suspension bolts for my car as I've ended up using them for random jobs . So I am happy to run a new bolt buy for the following:

2 x M12 X 260mm Bolts - (Rear Uprights)
2 x M12 X 220mm Bolts - (Diff Mounts) <--- I have increased the length of these by 20mm from the previous group buys as the bolts I got were not long enough for my diff (standard sierra).
20 x M12 X 70mm Bolts - (Wishbones, Rear Camber Adjuster, Lower Shock Mounts)
6 x M12 X 60MM Bolts - (Upper Rear and Front Shock Mounts)
30 x M12 Nyloc Nuts - (Type P - these are a bit thicker than normal nuts and better suited to suspension applications)
30 x M12 Plain Full Nuts - (these are for test fitting components without ruining the Nyloc nuts)
60 x M12 Flat Washers - (Form A)
60 x M12 Black Plastic Nut Covers.

All parts will be 8.8 grade, grade 8 for nuts and mild steel with BZP coating.

From ringing out 3 different suppliers it seems that I can get all of the above for £27 with £8 postage on top for each set. If anyone would like a set then just let me know.

1. Tatey
2.
3.
4.
5.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting

Last edited by Tatey : 8th February 2012 at 03:44 PM.
Reply With Quote
  #2  
Old 8th February 2012, 04:54 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

A suggestion Simon,two cap screws/allen bolts of the right length for the rear top shock mounts as it saves drilling large holes.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #3  
Old 8th February 2012, 07:31 PM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default

Can i add my name to the list please, if you let me have your address i will send payment as and when needed

Many thanks for this

Arfon
Reply With Quote
  #4  
Old 8th February 2012, 09:59 PM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default

Quote:
Originally Posted by flyerncle View Post
A suggestion Simon,two cap screws/allen bolts of the right length for the rear top shock mounts as it saves drilling large holes.
Paul,

I have to say I've had no issues with installing nuts/bolts for the top rear shock mounts. Is this when trying to tighten them up?

1. Tatey
2. The Arf
3.
4.
5.

Arfon, which address are you after? Paypal? Ideally I'd prefer bank transfer as it's free, so I don't get stung with fees. Is this ok with you?
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote
  #5  
Old 10th February 2012, 09:43 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Would just save a little hassle drilling such a large hole Simon.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #6  
Old 11th February 2012, 02:12 PM
TheArf TheArf is offline
Senior Member
 
Join Date: Jan 2010
Location: Wrexham North Wales
Posts: 1,041
Default

Was thinking of sending you a cheque prior to purchase if that was ok, have only ever used paypal on the bay, am a bit of a techno phobic

Arfon
Reply With Quote
  #7  
Old 12th February 2012, 08:14 PM
yewtree yewtree is offline
Junior Member
 
Join Date: Jan 2012
Location: Lincolnshire
Posts: 13
Default Re. Bolt Buy

Hi Tatey. Can you add my name to the list please. If you give me details when they arrive re bank account, sort code, etc. I will happily pay by bank transfer.
Bill
Reply With Quote
  #8  
Old 19th February 2012, 09:58 PM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default

1. Tatey
2. The Arf
3. yewtree
4.
5.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote
  #9  
Old 20th February 2012, 04:33 PM
tailwind tailwind is offline
Junior Member
 
Join Date: Feb 2012
Posts: 10
Default

Hi Tatey, Please add me to your list, send bank details as and when. Pete
Reply With Quote
  #10  
Old 20th February 2012, 06:14 PM
Tatey's Avatar
Tatey Tatey is offline
Senior Member
 
Join Date: May 2009
Location: Leicester
Posts: 827
Default

1. Tatey
2. The Arf
3. yewtree
4. tailwind
5.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9

My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020

Total Spent so far: Stopped counting
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:55 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.