#1
|
|||
|
|||
electric reverse
Has anyone got details of the starter motor reverse system talked about for bike engined cars?
|
#2
|
||||
|
||||
I think 7ish in NZ had a very effective and neat setup which i think you will find link to his blog if you do a search on forum.A few others here have done similar,maybe quick search reverse or bike engine etc.
|
#3
|
||||
|
||||
Send Chunk2772 a pm Angel, he has fabricated one for his car and looks rather good
Andrew
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#4
|
|||
|
|||
http://www.chaindrivediff.com/ neat chain driven diffs aswell as lecy reverse for bike engined toys.......damn fine bloke too
|
#5
|
|||
|
|||
I used one from Lynx on an R1 Engine, see http://www.lynxae.co.uk/Products-Bikesports.htm
Works quite well but you will need to fabricate all your own brackets Rob |
#6
|
|||
|
|||
you can get a gear and motor from one of the kit manufactures
it was a small gear that pinched inbetween prop and diff flange wit what looked like a fiat starter motor thay where at stonleigh in same hall as satern in the top r/h corner MNR i think but not too sure |
#7
|
|||
|
|||
I used a bike starter motor with a matching sprockety thing made in plastic just in case it decided to go into reverse without me knowing about it....
|
#8
|
|||
|
|||
I used a seat ibiza starter motor activated via a relay which is interlocked against the neutral light
tilly |
#9
|
|||
|
|||
Thanks guys...I think I know what I have to do now...
|
Thread Tools | |
Display Modes | |
|
|