#1
|
|||
|
|||
Headlight Mounting Brackets
Good Evening all,
Nearly to the point of having a rolling chassis I'm looking at the headlight mounting brackets (the oval tubing) and I am thinking can I just use some 25mm round tube instead of the oval tube. What are your thoughts? Regards Jon |
#2
|
||||
|
||||
Oval tube is purely an aesthetic issue. Round tube will perform the same job and in my experience, much easier to get hold of.
|
#3
|
|||
|
|||
I crushed some 19mm round tube in the vice, and after several practices it seemed pretty good.
I've tried to post pictures but as usual no joy. |
#4
|
||||
|
||||
Quote:
Seriously though, round tube will be fine or has been sugested, if you have a vice that is up to the job you can soon make it oval I made a small oval dolly & ovalised some 25mm round tube on the anvil block
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#5
|
|||
|
|||
Many thanks for that guys, will use some round section instead.
Regards Jon |
Thread Tools | |
Display Modes | |
|
|