#1
|
|||
|
|||
Ebay chassis packs or any other suggestions.
Hoping to purchase a chassis pack fairly soon,
I've seen a few on ebay but was wondering if there were any recommended people/companies on here? Thanks all Chris |
#2
|
||||
|
||||
HandyAndy is your man
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#3
|
|||
|
|||
Talon motorsport. They do flat pack chassis packs or fully welded chassis (plus lots of other bits). i have always been very happy with the service i get from phil (talonmotorspot) and he always goes the extra mile.
|
#4
|
|||
|
|||
Handy Andy has proven to be more than just a seller of flat packs. Couldn't recommend him highly enough.
|
#5
|
|||
|
|||
Hi
I got my original chassis from a company no longer in business but would recommend both the andys at saturn and john at 3ge. Russ |
#6
|
|||
|
|||
I bought mine from Handy Andy / Saturn, one of the best moves I made. Not just because it was a bargain but because the support and help from Andy Saturn added a huge amount of value to my purchase.
Enoch |
#7
|
|||
|
|||
Quote:
I assume this is handyandy? http://www.saturnsportscars.co.uk/st...iewCat&catId=8 I'll send him a message. Thanks all for your recommendations |
#8
|
||||
|
||||
I would recommend handy Andy and saturn. Going way more than the extra mile. Couldn't be more helpful when I had a problem with the bits I had.
I've Also used 3ge for all my plates and wishbones. They were also very good quality. |
#9
|
|||
|
|||
Hi, thanks all for your suggestions,
I have made contact with HandyAndy today and he just needs to know which gearbox and rear tub i'll be using. I just need to do some research now Thanks again |
#10
|
|||
|
|||
Talon and Andy are two different people,and the attention to detail and help from Andy are second to none.
|
Thread Tools | |
Display Modes | |
|
|