Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
Reload this Page Help required from a higher power !
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 5th March 2014, 07:59 PM
jason 82 jason 82 is offline
Senior Member
  
Join Date: Feb 2012
Location: Coleford
Posts: 354
Default Help required from a higher power !
What is the best way of joining the Gillham rear arches to the tub please ? I want to use the wing piping, but wasn't sure wether to use 2 bits of plate to sandwich the panels to spread the load or not. The tubs seam to be very thin, & I am not sure of the best way to join it all up without busting the tub.
Reply With Quote
  #2  
Old 5th March 2014, 09:46 PM
wylliezx9r wylliezx9r is offline
Senior Member
  
Join Date: May 2010
Location: South Wales
Posts: 321
Default
I used m10 bolts and penny washers either side about 6 per arch. Works a treat.
Reply With Quote
  #3  
Old 5th March 2014, 11:46 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
  
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,511
Default
I pretty much did the same with 8mm and made sure where there was some steel work behind it I tapped it and used it also as a mounting point
Reply With Quote
  #4  
Old 6th March 2014, 08:27 AM
flyerncle flyerncle is offline
Senior Member
  
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default
I hope you mean 8/10 mm spanner size !
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #5  
Old 6th March 2014, 12:05 PM
SeriesLandy's Avatar
SeriesLandy SeriesLandy is offline
Senior Member
  
Join Date: Nov 2008
Location: Portsmouth
Posts: 828
Default
Quote:
Originally Posted by flyerncle View Post
I hope you mean 8/10 mm spanner size !
I was thinking that, I used m6 stainless hex bolts for all the bodywork.
__________________
Steve
My Photo Album | Haynes Roadster FAQ | IVA Forms How To
Reply With Quote
  #6  
Old 6th March 2014, 05:14 PM
jason 82 jason 82 is offline
Senior Member
  
Join Date: Feb 2012
Location: Coleford
Posts: 354
Default
Thankyou everybody for the help, it's appreciated.
Reply With Quote
  #7  
Old 6th March 2014, 06:50 PM
flyerncle flyerncle is offline
Senior Member
  
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default
Hell of a size hole in thin f/glass
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:34 AM.

Contact Us - Haynes Online - Archive - Top

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.