![]() |
#1
|
|||
|
|||
![]() today i have finished cutting and tacking the main chassis together . i have just done the trans tunnel all i need to do is the rear frame . i will try to put som pics up soon i now most of you have seen it all before but it a huge mile stone for me . P.S. do you think it is ok to start to fully weld the chassis so far please advise ??????
Last edited by semtexsteve : 20th July 2009 at 05:37 PM. Reason: spelling |
#2
|
|||
|
|||
![]() Make sure you have all the diagonals tacked in and that there are no big gaps....
![]() And have fun ![]() |
#3
|
|||
|
|||
![]() Not wanting to teach anyone to suck eggs but...if for any reason you find yourself with a tube a tad short or the gap a bit iffy cut another piece of tube don't go trying to fill gaps too much as you will put way too much heat into and end up with a big 'nana.
![]() |
#4
|
|||
|
|||
![]() thanks mate all the diaganles are in and taked and no big gaps i only got 1 or 2 small ones none no biger than 1mm . i had 1 or 2 miss cuts but as you said i just cut new ones [ got it right second time [ or 3rd ] ] cant wait to start to fully weld it and make the rear frame thanks again
|
#5
|
||||
|
||||
![]() well done on this milestone of your build, it is a great achievement to get to this point in your build.
pictures are a must, ![]() ![]() ![]() well done ![]() andy |
![]() |
Thread Tools | |
Display Modes | |
|
|