|
|
#1
20th November 2011, 10:07 PM
|
|||
|
|||
Been ebaying with a vengence
Have hit the ebay good style lately and I think " the boy did good". Sierra steering wheel and column with lock and key £31, rear back plates, brake shoes, bearing hubs, drums and break cyinders £35 the lot, bearing for the steering column support £9.99 and a nice Dremmel oh and a handbreak £16, not bad me thinks
Arfon 
|
|
#2
21st November 2011, 01:52 PM
|
||||
|
||||
|
a good 75% of my car will be sourced from the bay... love it or loathe it, not having to get off your butt to obtain things is ...well, kinda nice, apart from answering the door of course
|
|
#3
21st November 2011, 02:28 PM
|
|||
|
|||
|
It beats crawling around under cars in the scrappy, especially this time of year
Arfon
|
|
#4
21st November 2011, 03:08 PM
|
||||
|
||||
|
Good on you Arf
|
|
#5
21st November 2011, 04:29 PM
|
|||
|
|||
|
Hi Twin hows the build going, are you still down south or back in Chester
Arfon
|
|
#6
21st November 2011, 05:00 PM
|
||||
|
||||
|
Sounds like you have managed to get a few bargains there Arf
  Your dead right about it not being much fun crawling about at the breakers, probably would have cost you most of that if you had made all that effort to remove them yourself
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#7
21st November 2011, 09:17 PM
|
|||
|
|||
|
Have started to clean up my diff which I also had off ebay earlier this year, what a job, the guy I bought it from had painted it in red lead for some reason god only knows why. Have taken cover plate off and the crown wheel is ingraved with 3.92 ratio, and i'm going to powdercoat it but not sure if i'm going to do it in black or silver. Any suggestions
Arfon
|
|
#8
21st November 2011, 11:43 PM
|
||||
|
||||
|
Quote:
|
|
#9
23rd November 2011, 04:00 PM
|
|||
|
|||
|
well done, sounds like you got some good deals there, should help the build along nicely!
tilly
__________________
www.heraldic-motorsport.co.uk
|
|
#10
23rd November 2011, 07:58 PM
|
|||
|
|||
|
Had a phone call tonight from my mate he has grit blasted the outside of the diff cover I left with him lastnight so I am going to have a go at powder coating the outside of it, think it will be in tittanium, ans painting the main casing black. Hey twin dont come back up here just to snaffel all the good bits
Arfon
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
