![]() |
|
#1
|
|||
|
|||
![]() Does anyone know what types of metal pipes can be used to join hoses together. I have plenty of galvanised pipe of the correct size. Is it any good ?
Cheers Peter |
#2
|
||||
|
||||
![]() Hi Peter,
Not sure if you mean short connections or long tubes to join the rubber hoses. For the long extensions I,ve used "Henry Hoover " tubes, perfect fit, stainless & best of all Cheap ![]() ![]() Got mine off ebay ![]() cheers andy |
#3
|
||||
|
||||
![]() make sure you beed the ends i didnt and ginge and i got some pretty nasty burns when the pipe blew off.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/ |
#4
|
||||
|
||||
![]() I wondered what those pictures of burns were about...bet you jumped around a bit....correction a LOT
|
#5
|
|||
|
|||
![]() Cheers lads,
I've got some Hoover tubing somewhere. I remember the burns Ash - I'll get a flaring. Peter |
#6
|
|||
|
|||
![]() I've found my pipes and plumbed it all in, using the original hoses. But after proudly showing the wife my handiwork I noticed that I haven't got a connection to the bottom of the expansion tank. On the Sierra it goes to the radiator but my clio rad has only 2 connections not three.
Any ideas ? Cheers Peter |
![]() |
Thread Tools | |
Display Modes | |
|
|