|
#1
|
||||
|
||||
Headlamps - 7" or smaller?
Hi
I've been looking at headlamps and I'm not really a fan of the 7" after seeing them on some 7's at Stoneleigh. Does the IVA allow for smaller diameter lights (can't find anything in the manual about it ) ?? I'm looking at these 5 3/4" lamps - http://www.cbsonline.co.uk/complete-...ac4-1654-p.asp Will they be OK? cheers Josh |
#2
|
||||
|
||||
They look to be WIPAC headlamps & according to CBS they are standard Caterham lights.
Should be fine for IVA
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#3
|
||||
|
||||
Good stuff
I'll be making my headlamp support brackets tomorrow then. How far out have people put their 'lamps from the chassis? ie how long shall I make my supports?! I think I red somewhere that the headlamps must be no more than 400mm from the outer edge of the car?? Cheers Josh |
#4
|
||||
|
||||
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! Build Pictures Build Thread |
#5
|
||||
|
||||
I agree with you Josh, 5 3/4" lights looks much more in proportion with the car and are fine for IVA. Yes they need to be within 400mm of the outer edge of the car.
AndyH.....
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#6
|
||||
|
||||
I got cheapie 7's from bolt on bits, brief review on my website. My intention is to swap for something more pleasing after the IVA.
I may donate my lamps to the Club for IVA passing loans once i am over that hurdle. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
Thread Tools | |
Display Modes | |
|
|