|
#1
|
|||
|
|||
advice needed
Some advice needed regarding the electrics if at all pos, my loom for my 1.8 cvh was a mess so trying to go it alone. Does anyone know via a diagram or a description in laymans terms how to connect up the lambda sensor and coil via a switched earth to get her to fire. Any help would be really appreciated many thanks in advance?
__________________
Richard Just keep going we will get there in the end. |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
re
Very kind thankyou but my loom isn't in the best of nick so not really an option was wanting to try to creat the switched earth manually if possible.
__________________
Richard Just keep going we will get there in the end. |
#4
|
||||
|
||||
Do you really need the lambda sensor connected to get it to fire? Sounds like you most likely have the same loom as me so have a look through some of the electrics threads that I've started when I was trying to get mine going.
|
#5
|
|||
|
|||
thanks
Cheers will have a look at thread but was under the impression that the lambda sensor controlled the switched earthing of the charging and releasing of the coils energy.
__________________
Richard Just keep going we will get there in the end. |
#6
|
||||
|
||||
I'm not sure on that one but I managed to start & run mine up with just the edis in limp home mode without the ecu or any of it's sensor connected.
|
Thread Tools | |
Display Modes | |
|
|