![]() |
|
#1
|
||||
|
||||
![]() What is this wire for? Its on the loom between the battery connections and the steering column
![]() and this one, its on the loom by the alternator & crank sensor, next to the lamda sensor ![]() |
#2
|
||||
|
||||
![]() The first photo looks like it is just a general earth wire, is it a brown wire under the black protective sheath? if so I,d suggest attaching it to the chassis .
But then again..... I hate electrics so maybe talking a load of tosh ![]() ![]() cheers andy |
#3
|
||||
|
||||
![]() So would it be safe to say any brown wires with a circle type connection at the end will just be earths that should be attached to the chassis (eg like the lights and the bundle of 4-5 by the fuse box)? Also is it safe to attach more than one earth to the same bolt?
|
#4
|
|||
|
|||
![]() The first one looks like an earth wire (as HandyAndy said).....I think.
The second one looks like a connection on to one side of the coil....I have a the I4 engine and the coil connection looks like that..... You can put more than one earth wire on a connection. Hope this helps. Shaun |
#5
|
||||
|
||||
![]() Yep collumn earth an +12v ignition feed for the coil,
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#6
|
||||
|
||||
![]() Ok so that's one down with the earth. Not sure what you mean about the +12v ignition feed for the coil though as I'm a bit of nub when it comes to this... Do I put it on something like the starter or where does that connect onto? My engine was a cvh cfi (injection)
|
![]() |
Thread Tools | |
Display Modes | |
|
|