![]() |
|
#2
|
||||
|
||||
![]() Hi James
I don't think that you will find the ruber ring is available as a service part. Had a sneaky feeling that the rubber ring is riveted in place, I have just been out to check mine & it is definately, factory riveted. The long & short of it is, you'll probaly have to buy a whole new assembly from Ford ![]() Rally Design do a suitable steering rack coupling though ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#3
|
|||
|
|||
![]() Use one of those cheeky wee knuckles from rally design, look better and better clearance wise as bit like those knuckley things in a socket set...
![]() |
#4
|
||||
|
||||
![]() I am with you on that one Mark
![]() Not the cheapest to buy but at least it will get rid of that rubber ring that's going to be about 20-25 years old ![]() You'll find them on this page. Rally Design The forged ones are the boys to go for ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#5
|
|||
|
|||
![]() Quote:
![]() |
#6
|
||||
|
||||
![]() So what parts would I need? I'm presuming the sierra coupling, group 4 coupling and a shaft
|
![]() |
Thread Tools | |
Display Modes | |
|
|