|
#1
|
||||
|
||||
D1 D2 D3 & D4
The diagonal chassis tubes mentioned in the title are thinner box section than the other chassis tubes (as you will know).
Just wondering, do i line them up central with the 25mm box or flush with the outer edge of the chassis? Also should i weld the uprights first before fitting them? They're only tacked at the moment, and i might have to grind the tacks back a bit to give enough room for the diagonals. Cheers Dave P.S. I've just updated my build blog if anyone's interested in having a look at a few pics. http://davesroadster.blogspot.com/
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#2
|
||||
|
||||
Flush with the outer edge.
And yes, I would fully weld the uprights before fitting them
__________________
. . David. Heaven, Warm days and Cool rides Last edited by dogwood : 16th July 2010 at 07:24 AM. |
#3
|
||||
|
||||
Hi David (17),
Just had a look at your build site diary....looking great, making some nice progress there , glad to see you got the genny sorted I hope you don,t mind me saying, but from the angle of the photo it looks like you have placed part U7 in the wrong place, it needs to be 155mm from the center line of the chassis as in diagram 4.8 on page 38, good luck with the rest of your build cheers andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk |
#4
|
||||
|
||||
Unless you got really teeny feet....
__________________
. . David. Heaven, Warm days and Cool rides |
#5
|
||||
|
||||
Think you might be right there. I'll have to check my measurements.
Thanks for the help.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#6
|
|||
|
|||
He's usually right Really irritating
Only joking Andy, you are a true legend. Annoying that you were right about my headlamp mounts though Enoch |
#7
|
||||
|
||||
Quote:
having said that it shouldnt make an awful lot of difference as its only a 3mm difference Ray |
Thread Tools | |
Display Modes | |
|
|