|
#1
|
|||
|
|||
project/parts for sale i have to save for a wedding so my project will have to end
i will be selling,
1 armoto cnc'd wooden wishbone jig for making your front and rear wishbones, unused so not burnt £15 2.0 zetec silver top engine f rom a 1997 mondeo £100 (bare) 1.8 cvh engine bare (stamped 1991) from f reg sierra (req cambelt & tensioner) £100 7.5" diff from a 1991 sierra with bolt on type shafts £60(used) 7" diff from f reg sierra 1.8 push in type shafts £60 (used) mk2 escort standard steering rack (recon) £50 1 pair of modified uprights (new) £80 1 set of gsxr 600 srad carbs £40(without trumpets & flanges ) 1 pair of front vented type brake calliper's (new ap locheed) and discs for sierra 1.8 f reg (new/stored ap locheed) £100 1 steering columbs with steering wheels from sierra £50 full sierra wiring loom with fuse box £30 1 pair of push in used half shafts( f reg 1.8 cvh 7" type) £40 1 pair of bolt on used halfshafts (j sierra 2.0 dohc 7.5" type)£40 1 unfinnished chassis with all the plates and diff brackets,and u brackets (some welded some tacked on) £200 1 willans race harness with groin straps etc fia approved (out of date for racing use) £50 1 propshaft (mt75 split type) £25 1 front suspension jig from saturn sc £50 1 f reg sierra servo with master cylinder fluid resevoir and top with switch £25 1 f reg sierra rear brake valve £5 sierra coolant bottle £10 cvh inlet manifold with carb £20 cvh exhaust manifold £10 few other bits and bobs just ask i live close to junction 1 of the m60 (stockport) if anybody wants to make me a sensible offer for the lot or any of the bits please pm me buyer pays postage or collects i started this project with good intentions but getting wed etc is more of a priority in the future wifes eyes ps i have a 1.8 cvh (£100) on a which needs the cambelt and tensioner changing, the engine was a reconditioned unit 2 years before i got the first donor vehicle i removed it to check the condition of the water pump etc which felt rough so i left the engine timed up but didnt fully fit the bits as i had the intention to fit new parts, then i got a zetec and changed my mind. i thought id give you guys a chance before i put bits on ebay
__________________
Rome wasn't built in a day!! http://www.flickr.com/photos/3667569...17844956/show/ Last edited by greasemonkey : 24th January 2011 at 11:34 AM. |
#2
|
|||
|
|||
Quote:
I don't need any of those bits myself, but I think you would do a lot better to put the prices you want on the parts, rather than wait for 'sensible offers'. It's a bit more work, I know, but I expect it will be worth it. |
#3
|
|||
|
|||
I have sent pm
|
#4
|
||||
|
||||
Megajolt please
Sorry to hear you are selling-up and congratulations on your fourth coming marriage. A car build can be postponed but a good woman needs to be snapped up immediately!
I'll take the: 1 megajolt tps type ecu & loom (tested on laptop and it works when powered and accepts a map but not been on a car yet) £100 or £150 with coil pack & edis unit. The full monty with the coil pack and EDIS please. PM me with details of how you want paying, etc. Thanks, Last edited by eSteve : 14th January 2011 at 10:13 AM. Reason: Added salutation |
#5
|
|||
|
|||
I will have the wishbones if you could send me your details for payment
|
#6
|
|||
|
|||
I would love the rear calipers and disc's.
But i have to had to pay for my daughters wedding tomorrow. if they have not gone within the next couple of weeks i will have them off you. Terry ps. can you find out a p&p for these please |
#7
|
||||
|
||||
shocks
Hey, thats a lot of gear you are having to shift, shame you are abandoning.
I am up for the shocks, can you give more info i.e. condition? Cheers, Joe. |
Thread Tools | |
Display Modes | |
|
|