Propshaft.

[twinturbo]

Who's done the prop themself?

How did you go about it?

If not, who have you used?


TT

[TSM Locost]

My join is approx 100mm from g/box end where i inserted an internal tube that was a tight fit into both halves of the prop, welded all round after having a 5mm gap between the 2 parts of the prop for penetration including spacer tube.

[spud69]

I tried to modify my own Rob and at the time thought i had got it perfectly straight and the same orientation as the original - until my first drive.....

It nearly shook the car to bits at 40mph. For such a critical part it really is not worth trying to do yourself. Dunning and Fairbank in Leeds are really good and will supply a brand new prop for about £95. Very good they are to.

AndyH

[twinturbo]

Yeah I have already e-mailed D&F. And your right £95 aint at all bad for a brand new item that's done correctly.

Once the car is rolling I will be measuring the installed dimensions and making arangments.

TT

[drury318]

I`ll second Nth West propshafts, rang them with dimensions and they made it within the hour then delivered it the next day, top class work and really helpful chap on the phone.
Dennis.

[dogwood]

I modded my own prop.
Worked out OK, no vibes at all.
The only prob with mine is I still got the rubber doughnut.

Now I got the new engine Im going for a new prop.
D&F quoted me the same price, with all new stuff.
So going with them when I get back....