Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 14th January 2014, 02:55 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 879
Default


2014-01-14_12-39-35 par Voucht71, sur Flickr


Pretty yellow isn't it?... one word to say: merde

So... it looks like I need to buy another engine...

And icing on the cake: my third radiator is leaking too, I just can't believe it! There should be a problem with the pressure in my cooling circuit!

Before I start the test, I removed a bit of coolant from the expansion tank as it is required. But while I was performing the test, water came up, and up, and up in the expansion tank, and I had to remove more than 1 litre along the way, otherwise, coolant was going into the tester (and I had to redo the test more than 5 times before it goes well)!

So, perhaps I had too much coolant, not enough air in the expansion tank, so the pressure in the circuit is too high and the radiator tubes brake? I'm using a Stant pressure cap which is 20-25lbs. It does not sound to me like a pressure a radiator can't take, but perhaps the problem come from there too.

Well, now, I'm so fed up, I just want to set fire to the car, the garage, the engine, along with all the tools, my working cloths, and perhaps to myself too
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:56 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.