![]() |
#221
|
|||
|
|||
![]() I've been scrounging to get good copies of the Mazda diagrams, but I think I'm going to spend the time color coding them (the ones I have are all black and white). I also labelled everything as I took it out of the car, so hopefully that will help the process. I am intimidated though!
__________________
My build: http://locostusa.com/forums/viewtopic.php?f=35&t=3774 |
#222
|
|||
|
|||
![]() the wiring diagrams are black and white or the loom is all black and white
__________________
Slowly tipping over the edge into madness |
#223
|
|||
|
|||
![]() ![]() Finished the fabricating on the expansion tank bracket ![]() ![]() ![]() Bracket for top hose Cooling system nearly finished i just need a new thermostat and a few jubilee clips
__________________
Slowly tipping over the edge into madness |
#224
|
|||
|
|||
![]() ![]() I had to move the steering wheel a bit closer to the seat ![]() And i made a supporting bracket for the steering shaft ![]() And i tacked the steering shaft extension in place
__________________
Slowly tipping over the edge into madness |
#225
|
|||
|
|||
![]() ![]() More wiring ![]() I got my rear lights they are for a defender I got all clear ones ![]() Mounted my maf using some turbo intercooler piping ![]() Mounted my fan aswell
__________________
Slowly tipping over the edge into madness |
#226
|
||||
|
||||
![]() Chipping away at it
![]() Are the lights 'E' marked? TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#227
|
|||
|
|||
![]() As well as E marked ensure that the fog light has an f or a b mark as well as mine failed the test on the first visit
Arfon |
#228
|
|||
|
|||
![]() The wiring loom is color of course, but the diagrams I have are black and white print. They have codes, but not easy to work with...
__________________
My build: http://locostusa.com/forums/viewtopic.php?f=35&t=3774 |
#229
|
|||
|
|||
![]() Been away from the build for a while
Next on the list was too hinge the bonnet at the front So i made a steel frame for the front of the nose cone which i riveted in place the fibreglassed over to give strength ![]() ![]() ![]() ![]()
__________________
Slowly tipping over the edge into madness |
#230
|
|||
|
|||
![]() Bonnet now in place
![]() ![]() Bonnet in place passenger side gap to scuttle panel ![]() Drivers side gap This will not do ![]()
__________________
Slowly tipping over the edge into madness |
![]() |
Thread Tools | |
Display Modes | |
|
|