|
#1
|
|||
|
|||
I stand corrected mine don't swap over they did do!!!
So mine is also a Talon chassis, I have also made some brackets that bolt up with the wishbones and also run it through two large cable clips that are bolted to the inch x inch box section across the top of the diff, although I haven't had it rolling their is plenty of adjustment and cant turn hub with a lever bar. Gary |
#2
|
|||
|
|||
Are you using Talons diff housing?
I’ve made my own but it means I can’t run the handbrake cables easily past the diff
__________________
Statistically only one in seven dwarves are happy |
#3
|
|||
|
|||
Yea I have one of Talons diff covers its not really that time coming over the top of it
Gary |
#4
|
|||
|
|||
Do you have a photo of how you’ve ran the cables over the diff?
My handbrake is positioned so it misses the gear lever when in reverse and that means it’s quite far back, which in turn means the handbrake cables are quite far back. Did you shorten your single handbrake cable?
__________________
Statistically only one in seven dwarves are happy |
#5
|
|||
|
|||
Buzz me over email or mobile and ill send some pics I can only seem to login to site on laptop also using single cable to handbrake
Gary |
#6
|
|||
|
|||
You should have a PM Gary with my email address
__________________
Statistically only one in seven dwarves are happy |
#7
|
|||
|
|||
No PM mate
Gary |
Thread Tools | |
Display Modes | |
|
|