Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 3rd October 2009, 08:36 PM
gingea1pom's Avatar
gingea1pom gingea1pom is offline
Senior Member
 
Join Date: Sep 2009
Location: wiltshire
Posts: 826
Default Gingea1pom's Build Diary

ROADSTER BUILD DIARY

3 Oct 09

I was actually watching paint dry! So I decided to start the build diary.

I need to go back a few weeks, I was in Halfords and saw the Bible by Chris Gibbs, I have wanted to build my own car for a few years now and Chris’s book looked like it could be in reach, financially. I stuck my CBR 600 track bike project on Ebay and also the bike lift to raise some cash as Miss Ginge, rightly so, said it was to be self funding. The bike went for £360 and the bike lift for £185. I spent £104.50 taxing the Range Rover then on Thursday the 1st of October things really got started, I took a load of rubbish from the garage down the tip and picked up an 8’ x 4’ sheet of MDF and some soft wood to brace the base board, on Friday I ordered the Steel box section from a place in Kent, 7 lengths of 25 x 25 box and 3 lengths of 19 x 19 delivered to Tidworth Wiltshire, including the VAT was £115 which I thought was really good. The only down side to the whole steel thing was they cant deliver until Monday 12th when I will be away, on the upside Nicky will be having her first day with the kids at school all day so she will be able to sit around waiting for my steel to rock up then stick it in the garage! I also got a moped through its MOT so that will go soon raising more cash.

Yesterday Friday 2nd I spent the afternoon and evening constructing the base board, at about 9pm I employed Nicky to help me flip it the right way up and I started to mark out the BR’s. I started with BR 12, 5 and 6, I measured in from the edge of the 1220mm board 51mm either side then, when I was checking my diagonals realised the board is actually 1222mm wide so BR12 was 1120mm long first lesson learnt. I sat back and had a brew and decided I need a ‘square’ as drawing 3 4 5 triangles at every 90º angle would take ages, I needed to paint the base board white and I need the longest rule I can find.

Finally I am up to today. I went to Wickes and purchased a 1m rule, 2m plasterer’s feather, a new expensive hacksaw frame and some blades, a small tin of white primer and some red oxide primer. The red oxide is for the steel when it arrives as any steel in the garage will oxidise in 2 weeks. The white primer has already been applied to the base board and I am waiting for that to dry and will apply a second coat. I couldn’t find a ‘square’ I liked! So once the second coat has dried I will make one out of some L section steel I have lying around.

It is now 8pm and the kids have gone to bed. I spent all afternoon constructing my 3,4,5 triangle to give me a true 90º, it was good practice in cutting accurately and a chance to dust of the welder, all went well. The primer on the base board has not really dried so it is not getting a second coat and I don’t think I will get to mark out tonight, I have all week as no steel, then I will be away during the week for six weeks so only work at the weekend BUT I then have the whole of December off work so I should be able to plough ahead. I have my lap top in the garage playing radio two whilst reading the forum as Strictly is on and it does my head in.

A bit of a rambling first instalment, I shall try and keep it to the point when I actually start building something. I am going to take some pictures of a white base board and a 3,4,5 triangle!

I was going to embed the pictures in the post but couldn't work it out so they are on photobucket in the link in my signature, dont get exited there is only 5 pictures!
__________________
Sent from my iPad, from who knows where in the world

I was building but I am not now!


Build Pictures


Build Thread
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:44 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.