|
#1
|
|||
|
|||
Bloody expensive drills Sean...
|
#2
|
|||
|
|||
I know
Better if you buy a set, but mine were still £50+ for 1-13mm in 0.5mm steps Still, they only come out the box for tough stuff I actually have a set of HSS, plus a set of Titanium coated (nicer on ally) as well. Different tools for different jobs.
__________________
Sean |
#3
|
||||
|
||||
we work almost only with stainless & have never had any problem drilling ,however it can happen that the drill wasnt sharp or wrong speed & the drill can burn & then what happens is that alot of the drill matirial stays in the hole & makes the steel immpossible to brill (so the inside of the hole can get as hard as the drill itself when it burns).
cheers |
#4
|
|||
|
|||
Made them from steel bar in the end,easy to machine and for the use they will get, probably last a lifetime.
|
Thread Tools | |
Display Modes | |
|
|