|
#1
|
||||
|
||||
I just traced your photo with lines and arcs in QCad, here's what I got: http://locost.lt/stuff/7.dxf
|
#2
|
|||
|
|||
Thanks, need to get someone with a cad programme to have a look at it. Is the size set to 18 x 20 cm? otherwise it'll be a small thing to put on the grille.
Having a hard time saving the file to my computer, am I doing something wrong? /Fredrik
__________________
McSorley+Rorty+Gibbs Locost Builder Sweden Last edited by Vedde : 19th October 2009 at 08:32 AM. |
#3
|
|||
|
|||
Quote:
DXF is drawing interchange format, and almost all CAD programs can read it. It's how we transfer information between incompatible CAD platforms I have just opened the DXF in AutoCAD 2008 (my day job) and it is 191mm high, and ~200mm wide (200.0046 or something) One thing though, the emblem is not symmetrical in CAD. Everything seems a little 'skewed'. It's not a lot, and probably wouldn't be that noticeable, but with CAD accuracy is a given
__________________
Sean |
Thread Tools | |
Display Modes | |
|
|