|
|
#1
17th January 2010, 08:32 PM
|
||||
|
||||
Wanted.
Hi,
just in the process of making my inlet manifold for carbs. Don't suppose anyone as some 50mm hose left over, that could be swapped for some tokens of the beer variety???? Enough to make 4 joiners would be gggggggggggreat!  
|
|
#3
18th January 2010, 09:12 AM
|
||||
|
||||
|
Hi Ash,
internal bore is about 40/41, the outside where the hose would go is 50mm. 
|
|
#4
18th January 2010, 03:27 PM
|
||||
|
||||
|
hose connectors
you need two of these cut in half cost me £15.05 for two delivered and they do some nice colours too Ray Last edited by RAYLEE29 : 18th January 2010 at 03:32 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
how big are the carbs most inlets are only 41mm max
Linear Mode
