#1
|
||||
|
||||
Modifying a nose cone
Hi guys,
with my car being 4" wider than a standard locost, and needing extra height to clear my monstrous engine, I need a nosecone that is significantly larger than average. I have a standard locost nosecone that I would like to modify to fit. I know the basic theory of cut-and-shutting a nosecone, but I have never really worked with GRP before and i don't want to risk ruining my nosecone. Has anybody done it successfully? Got any pictures? Thanks Sam
__________________
Check out my Build Blog www.samsv8locost.blogspot.com And here's all my build photo's on a picasa web album http://tinyurl.com/5tbtm46 |
#2
|
||||
|
||||
hi, ive widened a scuttle by 2" and a nosecone by 2" and recently added some height to the nosecone all quite succesfully pics of widened scuttle and nose in my build diary they are not finished but ive done loads of bodywork so i know theyll finish ok in the end
Ray |
Thread Tools | |
Display Modes | |
|
|