#1
|
|||
|
|||
bits and bobs to go at exeter show
hi im having a bit of a clear out of spare extra/exess parts for space and kit funds . as im only 5 min from the westpoint showground and going to the show one of the days im thinking if anyone wants thease bits to let me know with an offer and the best offer can buy 'n' collect at the exeter show
i have upper rear whisbone ajusters with nuts (x2 pairs) pro made and painted black (saterns i think) pair of front hubs/uprights with calipers (needs new vented discs) complete pair of front hubs bare (gone to deano) pair of front calipers inc carriers (slide pins missing) front lower wishbones (one made one to build) set of wishbone bush tubes (short tube poly bushes fit in) sierra prop (rubber doghnut type) pinto engine mounts (pair) and ally brackets that bolt to block few other bits ask if your after anything i may have one going spare. im sure i have a few more bits to add to the list. Last edited by baz-r : 23rd October 2010 at 06:40 PM. |
#2
|
|||
|
|||
just a note bits are availble for both show days
i can drop them off or you can pick them up (free cuppa) as im in spitting distence from the showground |
#3
|
|||
|
|||
got any coilovers laying about
|
#4
|
|||
|
|||
sadly not as i need to get a set myself
|
#5
|
||||
|
||||
how much for the pair of front hubs/uprights with calipers (needs new vented discs) complete
or what would i need as i allready have the calipers and discs?? Last edited by Deanno : 18th October 2010 at 11:29 AM. |
#6
|
|||
|
|||
sorry for the late reply
if you have discs and calipers i have a bare set of hubs with flanges un reamed at the mo but i have a reamer but would need a bottom balljoint to set the corect amount of ream |
#7
|
|||
|
|||
sunday people pm me with a mobile no. if you want anything before i leave the house if you want to pick up at the show.
|
Thread Tools | |
Display Modes | |
|
|