#11
|
||||
|
||||
Quote:
http://www.dunnellengines.com/zetec_...partno=RMP1400 http://www.scholarengines.co.uk/Lowline%20sump.htm Not cheap but they are good, sometimes you'll find them on e-bay. The bolt patterns are the same as CVH but the end corner, 6mm, holes are missing on the Zetec but if you use a new gasket and sealant it will be fine. Andrew
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#12
|
||||
|
||||
I'm going to give cutting mine a go, only bit that worries me really is shortening the pickup pipe and I can imagine getting that sealed with weld properly so it isn't overwelded and not enough oil gets up the pipe or underwelding and it leaks :S
|
#13
|
|||
|
|||
See if you can find a local firm who can tig weld the tube for you.
|
Thread Tools | |
Display Modes | |
|
|