#1
|
||||
|
||||
Manifold Question
On my inlet manifold there is a take off that needs blocking off (think it was the vaccum take off). I'm not sure of the thread but it's a taper (NPT?).
Does anyone know what size it is? (12.3mm wide at the thinest end and 1.3mm between threads). Cheers guys. Outlet arrowed in red photo(1) (Small).JPG |
#2
|
||||
|
||||
From the charts I have - 1/4 BSPT
|
Thread Tools | |
Display Modes | |
|
|