Which header tank

[mgglep]

Originally Posted by flyerncle

Fairly sure Spud put his under the nosecone,I would place it on the nearside bulkhead,if it boils at speed you will get covered in hot water/antifreeze.

if you use the push and twist caps they are designed to lift under pressure coolant would escape down the tube to a place of your choosing unlike screw caps that vent to the atmosphere

[SeriesLandy]

Mgglep where did you get your exhaust headers they look really smart?

[mgglep]

the exhaust is from an MK they are expensive new and they dont fit very well as the angle is wrong luckily i found one on ebay i got the whole exhaust for £100 i then just cut it and adjusted each tube until the angle was good then welded up