Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 3rd March 2013, 08:26 PM
Johno's Avatar
Johno Johno is offline
Senior Member
Join Date: Sep 2011
Location: Lutton (East Anglia)
Posts: 497
Default Harness anchorage points

Need some advice on this topic.
I know most people are mounting their top anchorage point for their harness off their roll bar tube but I plan to mount mine from the top of the seat rail box section the same height as the mounting plate for the roll bar base plates.
Iv'e tried to keep my seat as low as possible and the distance from the the seat base to the top rail is more than the 450mm as specified in the IVA manual.
The area I'm struggling with is this... I'm using a GRP seat with holes through the top for the harness. Correct me if I'm wrong but as long as the harness does not pull down on the seat (this then becomes a load bearing structure) this will be OK but on a post somewhere I've read "as long as the anchorage point is not lower than shoulder heigth it will be fine".
So what if the examiner is a different height to me and the top anchorage point is either above or below shoulder height without touching the seat which is acceptable....
I plan to make machined spacers if required to clear the seat and use eye bolts as Westfield.

Sorry not very good at explaining myself but I hope you get the jist...
Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction.
Albert Einstein


Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT +1. The time now is 12:21 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.