#1
|
|||
|
|||
changing from ally tub to GRP
Can anyone tell me what needs altering on a chassis designed to take an ally tub to suit the GRP tub?
Cheers Will |
#2
|
|||
|
|||
I know the rear tub tubes have to be removed and I think there is an extra bit added at the bottom but damned if I can find a thread showing it!!!
Hopefully someone will be along shortly to elaborate Russ |
#3
|
|||
|
|||
There is a drawing on here somewhere. I have printed it off somewhere if you get stuck will upload a picture.
|
#4
|
|||
|
|||
I think Equinox have a GRP tub that goes over the rear chassis rails and therefore no modifications required, could be wrong though.
|
#5
|
|||
|
|||
that's the indication I was given when I picked up my equinox bodywork, haven't fitted it yet though.
__________________
http://meandthekitcar.wordpress.com/ |
#6
|
|||
|
|||
Cheers for the input guys, ill drop them a line
Will |
#7
|
|||
|
|||
Anybody know the width of a mx5 roadster please ? Outside edge of front wheel, to outside edge of the other front wheel please ? Having quote on a brick garage, and builder needs to know what size door to fit. Massive thanks
|
#8
|
||||
|
||||
I've fitted a 7ft (it might be 7' 4") wide door to my garage and I've only taken my car (focus) in and out but it's TIGHT I would go as wide as you possibly can around 8ft - 8 1/2ft wide.
|
#9
|
|||
|
|||
Lovely. Thank you very much.
|
Thread Tools | |
Display Modes | |
|
|