|
#1
|
||||
|
||||
I see, I just looked through skovs pictures and saw he ordered an engraved plaque. So I just did that for the grand total of £2.40. Any chance of a picture of what you have done?
|
#2
|
||||
|
||||
I did similar to David but more high tech and used a laser to mask the black paint off and a mill to engrave the numbers.
Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#3
|
||||
|
||||
Fancy making another for a small fee? Looks very professional.
|
#4
|
||||
|
||||
I would but it took me 3 goes to engrave one without going all the way through the metal as its only 0.5mm thick.
Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#5
|
||||
|
||||
I did the same. Just a trophy plaque off eBay. I think the one I got was about 80x40mm and cost about £2.50
|
#6
|
||||
|
||||
Good to know.
|
Thread Tools | |
Display Modes | |
|
|