#11
|
|||
|
|||
Loving the build so far, so who is going to run a book on how long it will take for the arse end to be going around the corner before the front on completion.
Arfon |
#12
|
|||
|
|||
I wouldn't worry about the ride height too much at the moment, as soon as you get the engine, diff, gearbox, brakes & wiring e.t.c, it will lower the car anyway. I love the paint job on the chassis, you should be well chuffed !
|
#13
|
||||
|
||||
Thanks for the kind words. The main reason im concerned about ride height is that i need to have the steering rack cut down. So i want to make sure that i am removing the correct amount based on ride height/steering rack position.
The chassis is painted with VHT satin black chassis and roll bar paint. Very nice stuff, very durable and the finish is beautiful. The floor and the entire undercarrage is painted with herculiner truck bed liner. Which give it a grippy ultra durable rubber finish. |
#14
|
||||
|
||||
hey dave, looking like a good build those mx5 engines are good fun with a supercharger on them. what ecu are you going to run it with? diy autotune are in suwannee and do full megasquirt kits, matt and the guys there are really helpful. I'm over in atlanta for work fairly often there are some good roads to have fun on when you get away from the city. Do you know what to do to get the car registered in GA? my roadster has been on the road for nearly 4 years in the uk i was considering moving to GA last year and was wondering if i would be able to import my car and get it registered.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/ |
#15
|
||||
|
||||
The supercharger kit came with a megasquirt, and yeah the diyautotune guys are walking distance from my home. So im hoping to get there assistance when time comes to tune this. As for registration, im honestly not completly sure yet. As it stands you'd have to get it inspected again to register it and depending on where you end up in georgia you may need emissions testing done. Upside is testing doesnt sound anywhere near as stringent as the uk. My problem now is that the laws can change between now and when i finish, im just hoping they change for the better. There has been some push to adopt SEMA's laws for registering custom car, which would simplify the process alot.
Here's the info i got from the guys that build the exocet kit car here. Quote:
|
#16
|
||||
|
||||
So I readjusted the ride height this past week and got the motor in place. This weeks goal is to get the motor mounts made and get the steering rack shortened. As you can see below, I'm going to more than likely have to make a custom hood to clear the supercharger.
|
#17
|
|||
|
|||
You'll need booster seats (and brown trousers )
|
#18
|
|||
|
|||
Incontinence pads more like
Arfon p.s. is adrenaline brown and smelly |
#19
|
||||
|
||||
September 27 Update:
Fairly Productive 2 weeks: •*Fabricated engine and transmission mounts • Finished Painting Chassis - used truck bed liner that I used on the floors to coat the entire undercarriage in a nice thick rubberized coating. This should help with vibration noise, and give me a nice durable rust proof finish. I figure this is more or less what they use on regular cars, so it should work well here too. • Reassembled chassis • Received delivery from kitcardirect.co.uk Neil is a top notch guy, I originally contacted him wanting to order carbon fiber caterham csr fenders, CF naca ducts, and CF winglets. I mentioned that I was having trouble sourcing haynes body work from the UK fiberglass companies, and he was nice enough to order them from equinox for me and ship them my way. I ordered a nose to begin with to verify it wouldn't get destroyed in the process. And am now ordering the the scuttle and rear wings. Not the cheapest or easiest way of doing this, but really no more expensive than ordering from the only company here in the states. This way I get exactly what I want. • Trimmed nose for openings and suspension bolts. Next will be trimming for duct work. • Good News clearance of supercharger is better than expected and may only require minor hood modifications to fit. |
#20
|
||||
|
||||
|
Thread Tools | |
Display Modes | |
|
|