#11
|
||||
|
||||
Quote:
Ill be asking alot of probaly very obvious questions as i dont know much about wiring this engine. Thanks Edit: just saw your other post. i have connected the plug fromt he front body loom to the +12v. Now to figure out what the yellow.black wire is meant to be? it goes to pin 10 of the edia and the engine managemnet relay according to the haynes diagram
__________________
my build pics Last edited by geeman : 6th March 2010 at 03:55 PM. |
#12
|
||||
|
||||
If you haven't got a manual, i've got an electronic version of the wiring i can send if you want??
|
#13
|
||||
|
||||
Quote:
I have that, its just im still no good with this wiring
__________________
my build pics |
#14
|
||||
|
||||
EDIS? Are you runing megajolt?
Black Yellow, Goes to the ignition relay and fuse 20, 21 , 22.. Maybe some more items but bascaly It's Ignition Live Feed. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#15
|
||||
|
||||
you'll just have to do a bit at a time, be careful because the wires tend to change colour as they go along!!
|
#16
|
||||
|
||||
Quote:
umm.. sorry again, didnt mean to say edis, meant to say hybrid ignition module. , imm really not doing to well here am i
__________________
my build pics |
#17
|
||||
|
||||
ok, for the time being, as i dont have an ignition swith, and am just trying to get the engine running, can i just connect the black/yellow to 12v and that to the relay and the hybrid ignition module, ?
__________________
my build pics |
#18
|
||||
|
||||
Do you have the engine loom with the three multiplugs ( 4, 6 , 8 pin ) Still intact.
It's 10 years since I have worked on a CVH but the wiring to the engine hookup is the same for all post 90 cars. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#19
|
||||
|
||||
are those the 3 that join the main loom to the engine loom. I have attached the 4 and 6 pin ones, however, i cant find anywhere to attach the 8 pin one. Thanks for the help so far!!!! Also i just realised that relay that the starter solenoid wire is connected to is an auto trans relay? WHats this for considering i dont have auto trans?
__________________
my build pics Last edited by geeman : 6th March 2010 at 04:10 PM. |
#20
|
||||
|
||||
There's 2 different loom diagrams for the 1.8 CVH manual ( GR8!! )
Do you have Relay X1 or not? TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
Thread Tools | |
Display Modes | |
|
|