Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 5th March 2014, 10:23 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default coilover covers

Would these be any good to get through the IVA 100mm radius test?

http://www.demon-tweeks.co.uk/motors...coilover-cover
Reply With Quote
  #2  
Old 6th March 2014, 12:51 AM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,511
Default

The actual shock itself is in an area that is not tested with the dreaded 100mm mushroom. The trapazoidal shape created inside of the wishbone frames is exempt.
Reply With Quote
  #3  
Old 6th March 2014, 02:07 AM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Ahh I see! I had a vague feeling about exemption but could not recollect. Thanks.
Reply With Quote
  #4  
Old 6th March 2014, 09:30 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Would stop £400 quids worth getting covered in kak ,good idea and practical solution.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #5  
Old 6th March 2014, 10:05 AM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

That's what I thought, especially on the front. On another point though, if that area is exempt surely then there is no need to try and cut the side panel around the coil over and wishbone ends? Other than for aesthetic reasons?
Reply With Quote
  #6  
Old 6th March 2014, 10:13 AM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Hmmmmm....

IVA Section 16 Exterior projections.

"Items within the volume enclosed by suspension components are exempt from exterior projection assessment."

"Where a vehicle consists of a frame structure or the surface has holes or sections without body panels fitted, all parts that are accessible with a 100mm sphere from the exterior of the vehicle are assessed against the criteria of this section, however where such items are deemed to be located within the interior of the vehicle, this section will only apply where they are located no more than 200mm from the outermost external surface surrounding the hole/gap and they are not an exempt item as listed in the Inspection Requirements of section 12."
Reply With Quote
  #7  
Old 6th March 2014, 04:06 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

I think if you read it and read it again it makes more sense (not) and is applicable to vehicles without bodywork that have sharpish edges that could be contacted or there again I could totally wrong.

I am fairly sure that area within the wishbone does not count and think Kev and I had the same idea pre his IVA.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #8  
Old 6th March 2014, 04:26 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,511
Default

yep correctamundo....remember you need some kind of locking device fitted to the bottom spring seat to stop in yurning, (the one you would use a "C" spanner on)
Reply With Quote
  #9  
Old 6th March 2014, 06:12 PM
beardydave beardydave is offline
Member
 
Join Date: Oct 2012
Location: Fareham
Posts: 73
Default

Would a grub screw in the spring seat count for that?
Reply With Quote
  #10  
Old 6th March 2014, 06:24 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,511
Default

probably....but I was concerned that it might weaken that point and make it prone to fracture, what with the forces that are on them
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:13 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.