pinto/DOHC/Zetec/Duratec, T9/MT75

[axle]

Cheers Ray will do!!

[RAYLEE29]

the guys name whos picture it is is,scotty g
Ray

[axle]

Hi
I am being a bit slow, how do you do the search on a topic on LCB, I could only see the search for members list?

[RAYLEE29]

Hi, under the big banner at the top theres a line that looks like this

U2U | Member List | Search | Photo Archive | Chat | Links

click search and a window will pop up, in the search for box type (dohc plenum) then click search wait a while and a small list should appear you want the one at the bottom that says dohc plenum mod click that and scroll down the page and theres a huge pic the same as the one i posted
hope this helps
you could pm scotty g im sure he will be helpfull about this mod
Ray
ps you dont have to pay if you dont want to, I havent but i am skint lol

[snapper]

The Type 9 is generaly used because it is small and light compared to the others but mainly because you can get any gear ratio set you can think of and the bell housing can be swapped unlike the MT75 which has the bellhousing built in to the body of the box.
The T5 as seen in the Cosworth is very strong and has the best standard ratios available but comes second hand for about £300 and is bigger

[gundog]

axle, do you have any photos of your engine in situ that you could post?
im trying to gather as much info as possible.

andy

[axle]

Hi Andy
Sorry for the delay, I am afraid it looks like i do not have the sofware to send you the images, if you send me an e-mail i shall be able to do it and it would be good if you can post them on the fourm so the other members could see them!

Cheers