#1
|
|||
|
|||
Another learning curve !!
The chassis seat belt mounts use 7/16" UNF nuts welded....not M12... i think my thought was 17mm spanner for M12 ... kinda ryhmes with 7/16" .... another moment of hitting myself repeatedly on the napper with the book !!! anyways they are all cut off and the correct ones welded on ...
|
#2
|
||||
|
||||
I just asked For 7/16 in the bolt shop and got unc. Alot of cutting later and I got the 4 nuts off and welded the new ones in.
|
Thread Tools | |
Display Modes | |
|
|