Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 6th March 2010, 04:49 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

Quote:
Originally Posted by twinturbo View Post
What engine are you using, and what have you done with the engine loom?

TT
ive got a 1.8cvh. Ive got it to turn over, and was being an idiot earlier, as i wanst looking at the ignition coils in my last post. Ive now found the ignition coils, and the plug from the edis connects to it. I now seem to have the ignition coils sorted, however when i was trimming my loom a mont or 2 back, i cut off all the plugs to the steering column, including the ignition switch. I am now wondering what i am meant to connect the black/yellow wire to that is on the ignition switch. I know the blue/black one goes tot he starter solenoid, but i dont know about the yellow/balck one.


Ill be asking alot of probaly very obvious questions as i dont know much about wiring this engine. Thanks


Edit: just saw your other post. i have connected the plug fromt he front body loom to the +12v. Now to figure out what the yellow.black wire is meant to be? it goes to pin 10 of the edia and the engine managemnet relay according to the haynes diagram
__________________
my build pics

Last edited by geeman : 6th March 2010 at 04:55 PM.
Reply With Quote
  #12  
Old 6th March 2010, 04:54 PM
DaddyA's Avatar
DaddyA DaddyA is offline
Senior Member
 
Join Date: Jan 2009
Location: Saltash, Cornwall
Posts: 263
Default

If you haven't got a manual, i've got an electronic version of the wiring i can send if you want??
__________________
Cheers

Daz...

http://s641.photobucket.com/albums/uu133/tashlotty/
Reply With Quote
  #13  
Old 6th March 2010, 04:55 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

Quote:
Originally Posted by DaddyA View Post
If you haven't got a manual, i've got an electronic version of the wiring i can send if you want??

I have that, its just im still no good with this wiring
__________________
my build pics
Reply With Quote
  #14  
Old 6th March 2010, 04:56 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

EDIS? Are you runing megajolt?

Black Yellow, Goes to the ignition relay and fuse 20, 21 , 22.. Maybe some more items but bascaly It's Ignition Live Feed.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #15  
Old 6th March 2010, 04:58 PM
DaddyA's Avatar
DaddyA DaddyA is offline
Senior Member
 
Join Date: Jan 2009
Location: Saltash, Cornwall
Posts: 263
Default

you'll just have to do a bit at a time, be careful because the wires tend to change colour as they go along!!
__________________
Cheers

Daz...

http://s641.photobucket.com/albums/uu133/tashlotty/
Reply With Quote
  #16  
Old 6th March 2010, 04:58 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

Quote:
Originally Posted by twinturbo View Post
EDIS? Are you runing megajolt?

Black Yellow, Goes to the ignition relay and fuse 20, 21 , 22.. Maybe some more items but bascaly It's Ignition Live Feed.

TT


umm.. sorry again, didnt mean to say edis, meant to say hybrid ignition module. , imm really not doing to well here am i
__________________
my build pics
Reply With Quote
  #17  
Old 6th March 2010, 05:02 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

ok, for the time being, as i dont have an ignition swith, and am just trying to get the engine running, can i just connect the black/yellow to 12v and that to the relay and the hybrid ignition module, ?
__________________
my build pics
Reply With Quote
  #18  
Old 6th March 2010, 05:06 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

Do you have the engine loom with the three multiplugs ( 4, 6 , 8 pin ) Still intact.

It's 10 years since I have worked on a CVH but the wiring to the engine hookup is the same for all post 90 cars.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #19  
Old 6th March 2010, 05:07 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

Quote:
Originally Posted by twinturbo View Post
Do you have the engine loom with the three multiplugs ( 4, 6 , 8 pin ) Still intact.

It's 10 years since I have worked on a CVH but the wiring to the engine hookup is the same for all post 90 cars.

TT
are those the 3 that join the main loom to the engine loom. I have attached the 4 and 6 pin ones, however, i cant find anywhere to attach the 8 pin one. Thanks for the help so far!!!! Also i just realised that relay that the starter solenoid wire is connected to is an auto trans relay? WHats this for considering i dont have auto trans?
__________________
my build pics

Last edited by geeman : 6th March 2010 at 05:10 PM.
Reply With Quote
  #20  
Old 6th March 2010, 05:22 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

There's 2 different loom diagrams for the 1.8 CVH manual ( GR8!! )

Do you have Relay X1 or not?

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:54 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.