#1
|
||||
|
||||
Zetec Engine Mount Pictures
I am fabbing up my engine mounts today for my 1.8 silvertop zetec engine. I did not remove the engine from the donor so I am unsure which bolt holes on the block are for the engine mounts, on the right hand side of the engine (if you were looking at the front of the car) there are 4 holes in a square pattern at the front of the block and 2 holes in line with each other in the middle. Are the 4 holes in the square pattern for the alternator and the 2 holes in line with each other for the engine mount?
Also on the left hand side of the engine there are 2 holes in line with each other, I am guessing that these are for the engine mount?
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting |
Thread Tools | |
Display Modes | |
|
|