Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 15th November 2011, 11:23 AM
andysredmini andysredmini is offline
Member
 
Join Date: May 2011
Location: Stourbridge. West Midlands
Posts: 86
Default Chassis Plate CP7 Orientation

Can anyone tell me the orientation of CP7 in relation to CP3/4
e.g. does the 121mm or the 125mm side go flat against the outer edge of CP3/4.

I have completed the passenger side apart from welding this on.

Many thanks

Andy
Reply With Quote
  #2  
Old 15th November 2011, 12:38 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

Offer it up and look to see where the centre of the hole in cp7 comes in relation to the hole in the damper bracket, don't be surprised if you can't get the two perfect.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
  #3  
Old 15th November 2011, 12:45 PM
andysredmini andysredmini is offline
Member
 
Join Date: May 2011
Location: Stourbridge. West Midlands
Posts: 86
Default

Thanks for the reply but it was the triangle piece cp7 i meant. not cp6 with the hole.

But if you put the 30mm hole in cp6 47.5mm in from the edge not the 50mm as the book the holes line up perfectly.

Thanks againg

Andy
Reply With Quote
  #4  
Old 15th November 2011, 12:55 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 872
Default

Hi
I tacked CP7 them yesterday, so it is very fresh in my head !
CP3/4 beign 150mm wide, minus 25mm of SB2, there is 125mm left for CP7. So :
125mm edge on top (against CP3/4)
121mm edge in the back (against CP6)
To be sure you can do as I did :
- first you tack the "box" (CP3/4 + CP5 + CP6) on top of SB2 without CP7,
- second you tack tubes D13 and D12 in place (needs RP1 to be in place too)
You will see that CP7 naturally comes on top of D12, and there is only one way you can line it up with CP3/4 on top and CP6 in the back : you can't put it the wrong way around.
Hope this help.
Good luck
Reply With Quote
  #5  
Old 15th November 2011, 12:57 PM
andysredmini andysredmini is offline
Member
 
Join Date: May 2011
Location: Stourbridge. West Midlands
Posts: 86
Default

I thought it would be the 125mm side. It made sense having the 25mm remaining from 150mm of cp3/4

Many thanks

Andy
Reply With Quote
  #6  
Old 15th November 2011, 01:09 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

Sorry got my chassis plate numbers mixed up, it's what happens when you stop doing 4 months worth of books to answer a post.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
  #7  
Old 15th November 2011, 01:13 PM
andysredmini andysredmini is offline
Member
 
Join Date: May 2011
Location: Stourbridge. West Midlands
Posts: 86
Default

That doesn't sound like much fun!
Reply With Quote
  #8  
Old 15th November 2011, 01:28 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

I'd prefer to be making some thing in steel rather than making small piles of paper and a head ache!
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:04 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.