|
|
#1
24th April 2013, 07:32 PM
|
||||
|
||||
MX5 Rear shocks
So I ordered the wrong rear shocks and springs for my build and Im working out what shocks to order to replace.
It looks like NTS were supplying 12" x 8" but im going with standard GAZ sizes which come out at 11" x 8" or 12" x 8.5". With a rear ride height of 5.5" the shock will be sitting at 9.6". The 11" give a 2.4" droop and 2.3" bump at the wheel. The 12" give a 4" droop and 1.6" bump at the wheel. So, 12" or 11"? Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures Last edited by Stot : 25th April 2013 at 07:36 AM. 
|
|
#2
25th April 2013, 07:52 AM
|
||||
|
||||
|
Did some more digging. The suggestion on bump vs droop is 50%-75% bump so the 11" look like the better solution for me. Cant go down to the 10" as that would leave me very little droop.
Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
