Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #21  
Old 20th December 2009, 04:32 PM
fabrun fabrun is offline
Member
 
Join Date: Sep 2009
Location: france(Reunion)
Posts: 71
Default

modified
Reply With Quote
  #22  
Old 21st December 2009, 11:55 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default

The upright measures 154-155 mm along the kingpin axis. See http://fridge.pov.lt/~alga/DSC_9346.JPG . The mushroom insert sticks out by 8 mm extra. The kingpin axis has a caster angle and the kingpin inclination, you can measure them approximately on the drawing on the page 75 of the book.
Reply With Quote
  #23  
Old 22nd December 2009, 03:23 AM
fabrun fabrun is offline
Member
 
Join Date: Sep 2009
Location: france(Reunion)
Posts: 71
Default

thanks a lot
Reply With Quote
  #24  
Old 22nd December 2009, 08:04 AM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default

It is all looking good man. There is a plan of seirra hubs compleat with mesherments some ware. Quick surch has found it for me umpteen times.

The peddal box: need a hydrolic clutch for BMW bits. The BMW one can be fabricated into the book box quite easaley.
Reply With Quote
  #25  
Old 22nd December 2009, 09:30 AM
fabrun fabrun is offline
Member
 
Join Date: Sep 2009
Location: france(Reunion)
Posts: 71
Default

thanks again
i 've found him

http://www.haynes.co.uk/forums/showt...ght=sierra+hub

can i re use the hydraulic clutch from the bmw with this pedal box?
Reply With Quote
  #26  
Old 22nd December 2009, 12:23 PM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default

Yer you can. I made a bracket to hold the mastersilinder to the pedal box and drilled a hole a bit biger than the cilinder but smaller than the boot making for a nice tight fit. I'll try and find a pic.
Reply With Quote
  #27  
Old 22nd December 2009, 12:31 PM
LeonN LeonN is offline
Senior Member
 
Join Date: Jul 2009
Location: Wirral
Posts: 146
Default



boath BMW brake and clutch. You can just see the bracket poking out. Pm me if you won't a better pic or some dimencions for your cad.
Reply With Quote
  #28  
Old 23rd December 2009, 10:14 AM
fabrun fabrun is offline
Member
 
Join Date: Sep 2009
Location: france(Reunion)
Posts: 71
Default

chassis in video
http://www.youtube.com/watch?v=5LYcZ2m1nMU
Reply With Quote
  #29  
Old 24th December 2009, 09:59 AM
bobbyh bobbyh is offline
Senior Member
 
Join Date: Jan 2008
Location: Stourbridge
Posts: 249
Default

any chance of a copy of the model? thanks
Reply With Quote
  #30  
Old 24th December 2009, 10:11 AM
fabrun fabrun is offline
Member
 
Join Date: Sep 2009
Location: france(Reunion)
Posts: 71
Default

i share (with everyone)
just send me a pm with your email
the 3d format you want
precise only the chassis or all the part

i'll can give everything which inside the book

Last edited by fabrun : 11th January 2010 at 05:18 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:18 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.