#1
|
|||
|
|||
Removing clutch cable from Merkur donor
Hello all,
I am in the process of stripping down my donor car and am puzzled by how to remove the clutch cable from the bellhousing. I removed the clip and the cable came partly out. What's the next step? I wish I had a repair manual for this thing. Mark |
#2
|
||||
|
||||
If you don't need the same cable for your donor. Or your wasting hours of time, just do what I did, and cut the cable off.
|
#3
|
||||
|
||||
Hi, most fords have a cover covering the end of the fork in your photo it looks like a metal one, pull this off and you can then see the end of the cable which you push through and slide sideways then pull out hope this helps. Ray
|
#4
|
|||
|
|||
Thanks for the feedback. I don't know if I need the cable yet or not so I'll try to see the end of the cable and slide it out. Otherwise, the bolt cutters are standing by.
Mark |
Thread Tools | |
Display Modes | |
|
|