Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 18th December 2009, 11:45 PM
thanasis kos thanasis kos is offline
Junior Member
 
Join Date: Dec 2009
Posts: 1
Default help with rear wishbones dimensions

I am trying to make the wishbones by myself.

Does anybody knows the correct rear wishbones dimesnions,?
because i am confussed by the book (i have the 2nd edition)
There is 2 different dimension at text and drawing

the donor car is a sierra 2.0i dohc (with rear brake disks)

thanks inadvance,

thanasis, kos island Greece
Reply With Quote
  #2  
Old 19th December 2009, 06:33 AM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

Go into the announcements section and there is a section on book ammendments that has the info on the rear wishbones.
If you are looking at the drawing for the jig on page 65 fig 5.15 the 465 dimension is incorrect and is 475 as listed in the text below it is the correct dimension.(475-50=425 which is the 391+33.7=424.7)
hope this helps

Last edited by ozzy1 : 19th December 2009 at 06:37 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:05 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.