Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 9th July 2020, 09:38 PM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default Front wings

hi guys,

When you mounted your front wings, did you have a measurement or point of reference to the rotation position on your front wings. How far they rotate back etc??
Reply With Quote
  #2  
Old 10th July 2020, 12:22 PM
Numplumb Numplumb is offline
Senior Member
 
Join Date: Aug 2012
Posts: 191
Default

Hi if you look at the IVA regs, there are measurements to tell you how far the wings must cover the wheels back and front.
Regards Mick.
Reply With Quote
  #3  
Old 10th July 2020, 12:27 PM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default

Hi,

I have found that, was just interested if anyone had used a point, chassis side member etc as their reference.
Reply With Quote
  #4  
Old 14th July 2020, 08:46 PM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default

Quote:
Originally Posted by CarlW View Post
Hi,

I have found that, was just interested if anyone had used a point, chassis side member etc as their reference.
I haven't got that far myself, but would have assumed you'd do it off a vertical line through the centre of the hub? I.e. a spirit level or similar?
Reply With Quote
  #5  
Old 14th July 2020, 10:02 PM
CarlW CarlW is offline
Member
 
Join Date: Aug 2016
Posts: 98
Default

Hi ya, yeah after I lined up and measured the angles etc, seems a good position is to have the rear edge sitting on the center line of the hub.
Reply With Quote
  #6  
Old 17th July 2020, 12:22 PM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default

Quote:
Originally Posted by CarlW View Post
Hi ya, yeah after I lined up and measured the angles etc, seems a good position is to have the rear edge sitting on the center line of the hub.
Might be worth a search on here (or Locostbuilders) for comments about mudflaps - i have seen a lot of comments in the past about the front wheels throwing up stones - which then hit the rear arches. I think this is why a lot of people fit metal arch guards onto their rear wheel arches.

Given the IVA requirements you might not be able to rotate the front wings back far enough to solve this problem, but I think it's something worth thinking about.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:53 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.