Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 16th November 2011, 02:56 PM
andysredmini andysredmini is offline
Join Date: May 2011
Location: Stourbridge. West Midlands
Posts: 86
Default Mx5 Build Transmission Tunnel

Iím currently working on the transmission tunnel on my mx5 based build from the Saturn guide.

I canít seem to fathom how the new cut pieces go together.
So far i have welded in
both TT1's (2 part) to the new amendments
TT2 & TT3
TT4, TT5 & TT6 (the mitred hoop)
TT9 & TT11

Iím stuck on TT6 & TT7

Am i correct in thinking that viewed from above the modified TT7's follow the line of the new TT1's but rise up to meet SB3?
And that the TT6ís will need mitred to suit and TT8 should be cut to fit between the TT7ís.

I was late last night when looking at this so I have probably missed something glaringly obvious that explains it all.I gave up in the end and decided to replace the liner in my welder instead of continuing. Wish I had never touched it. I ended up having to dismantle the gun and part of the machine and the new liner didnít even fit. 2 hours later i was no better off than when i started.


Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT +1. The time now is 01:57 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.