Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 23rd August 2009, 07:11 AM
Murray Ralls Murray Ralls is offline
Junior Member
 
Join Date: Jun 2008
Location: Bucklands Beach, Auckland, NZ
Posts: 6
Default Rear Caliper Position

A wee note to free thinkers like me who are prone to not thinking enough. I reasoned to myself that it did not matter about the hub mounting hole positions on the rear uprights, why should they be vertical for disc brakes & horizontal for drums? After all the doner disc braked car had the calipers on top & if I made the holes horizontal both uprights would be the same & save confusion. So I welded them up that way, simple. Then had a thought while out execising. Better try the hubs & calipers on the finished product. Sure enough the calipers foul the top suspension arm attachment ears. Bugger! However there is always a way out & that is to swivel the hub through about 45 deg. to the rear. You can pick up 2 of the existing holes on the diagonal & drill & tap 2 new ones to suit but be careful to make 1 right hand & the other left hand. Instead of the calipers being vertical the will be at an angle, way cooler.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:01 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.