#1
|
|||
|
|||
zetec engine fitment?
qestion to those who have fitted zetec engines how close is the engine placed to the bulkhead or TR8. cannot tell from some pics and I trial fitted my recently and left 50mm from rear of block that put the end of gearbox 100mm past TT5.
Do you think that is enough? any help welcome thanks tony |
#2
|
|||
|
|||
As far back as possible and enough to get bell housing bolts out,that top rail has been removed/moved on a few builds.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#3
|
|||
|
|||
If you're using a type 9 it'll be the reverse switch, clutch lever and gear stick that determine how far back you can go.
I'm using a CVH (for now), so pretty similar engine configuration to the zetec. Its the thermostat housing that tries to occupy the same space as TR8, unless you go for an expensive water rail. I made a cut out in the rail and added another beneath to make up the strength |
#4
|
|||
|
|||
If you google "teamtrain Saturn" Spuds flickr contains pics of the roadster I put together and you can see how far back it will go,you can also see the stat housing from G20 Ginetta that fits in no bother and both sensors are in too.
The futher back it is helps with the balance.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. Last edited by flyerncle : 23rd July 2014 at 08:16 AM. |
#5
|
|||
|
|||
cheers guys
|
#6
|
|||
|
|||
I have just put some pictures of my zetec (silvertop) in the chassis. It is as far back and low ass I could get it. Pictures aren't great, but if you need any dimensions let me know and I will go out and measure.
__________________
My Blog : leroysroadster.wordpress.com |
#7
|
|||
|
|||
Hows it coming mate, am away in. Pembroke until friday, maybe we can catch up with ayjay soon
Arfon |
#8
|
|||
|
|||
Sounds good, I went to santa pod a few weeks ago and my mate I went with was rebuilding ayjays engine I think! Small world eh...
When you want to meet up and where?
__________________
My Blog : leroysroadster.wordpress.com |
#9
|
|||
|
|||
hi leroy thanks for offer, just been on your blog and it looks like yours is not as far back as mine. Is that because the gear box you have is longer than type 9?
I will be putting unit back in again this time with clutch lever arm on because it looks really tight fit. cheers anyway tony |
#10
|
|||
|
|||
hi,
Quite possibly. I could not get the engine any further back as the bell housing would foul the chassis rail but the mt75 is larger than a type9 so it may well look quite different.
__________________
My Blog : leroysroadster.wordpress.com |
Thread Tools | |
Display Modes | |
|
|