Suspension bolt kit group buy

[Bonzo]

I will soon be ready to bolt all of my suspension back on, for the last time

Although I have plenty of bolts, unfortunately, they are set bolts & I personaly, don't think it too wise to use them !!

Most of you will be aware, if fixings are bought in larger quantitys, it tends to work out a lot cheaper

Have gauged some prices & here's what I have come up with.

Full suspension & diff mounting Kit

2, M12 X 260mm bolts ( Rear uprights )

2, M12 X 200mm bolts ( Diff mounts )

20, M12 X 75mm bolts ( Wishbones, rear camber adjusters & Lower rear shock mounts )

6, M12 X 60mm bolts ( Front shocks & rear upper shocks )

30 M12 Nyloc nuts, Type p, 14mm thick

60 M12 Flat washers ( One for each side of the bolt ) Form A 24mm od, 2.5mm thick

60 M12 Black plastic nut covers


I have costed each kit at about £22.50 - £25 Max, dependent on postage cost.

To make full use of buying full boxes of the longer bolts ( This is where the bulk of the cost is ), I will need to find enough interest to shift 10 sets .

I am quite happy to organise a group buy as it may help others avoid the headache of finding the long bolts & paying through the nose by buying small quantitys

Any thoughts welcome.

Edit
Just to add, the bolts will be High Tensile 8.8 grade & all bolts, nuts & washers will be Bright Zinc Plated

-----------------------------------------------------------------------


2nd Edit

Here's the list so far

1: Bonzo + nut covers

2: Tatey + nut covers + Plain nut set

3: Greasemonkey + nut covers

4: KenK + nut covers + Plain nut set

5: les g + nut covers

6: HandyAndy + nut covers

7: CarlKnight1982 + nut covers

8: David 17

9: Luke2482 + nut covers

10: Ginger Nutter + nut covers

11: Geeman + nut covers

12: Tkpm + nut covers + Plain nut set

13: onedayTM + nut covers + Plain nut set

14: Ozzy1

15: Hoybi
-----------------------------------------

If any of you are confused about the nut covers, please read further down the thread.

I have found a cheaper source for most of the fixings in addition to a low cost source of M12 plastic nut covers .... Looks as if I can include nut covers without increasing the kit price