#1
|
||||
|
||||
Which is inlet and which is outlet - ZX6R fuel pump
I'm wondering if people could let me know which side of my fuel pump is inlet and which is outlet, it is from a carbed ZX6R bike and came off the same bike that my carbs are from. From looking down the spigots one side seems to be a rotor vain (LHS), which I'm guessing is the inlet, and the other side kind of looks like a valve which I'm guessing is the outlet, but confirmation from people would be much appreciated.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting |
#2
|
||||
|
||||
Left is In, Right is Out, as you have it shown in that photo. The pump is marked somewhere, it must be for me to have plumbed it in correctly!
|
#3
|
||||
|
||||
Heh I just connected mine up to a battery and switched in on and felt which one had the air coming out
|
Thread Tools | |
Display Modes | |
|
|