FS Roadster pedal box

[dogwood]

I am going to sell my pedal box I made last year for my car.
It was only fitted for about 6 months.
It's made to book spec.

I have changed to the standard Sierra pedals,
So these are no longer needed.
They sell new for over £90
I am going to put it on ebay for £65.
But thought I would offer it here first.
So anybody interested, 50 Sovs to you.
I can bring it to Stonleigh if needed.

I'll put up a pic tomorrow....If I remember.

[HandyAndy]

Hi David,

what size hole is the master cylinder hole please?

might be interested.

cheers
andy

[dogwood]

Trust you....lol

Dont know off hand.
Ash may know, he's got the master cylinder.
I'll measure it tomorrow if ya can wait

[HandyAndy]

Originally Posted by dogwood

Trust you....lol

Dont know off hand.
Ash may know, he's got the master cylinder.
I'll measure it tomorrow if ya can wait

no prob, cheers David

cheers
andy

[dogwood]

Here's the pic of the pedal box, as promised.
The MC hole is 34mm dia, and the bolt spacing is 90 mm.

It comes with the pushrod, that fitted my MC.
It also has the Dogwood patented clutch cable adjuster.
So you can use a standard Sierra clutch cable (Type9)

I've given it a lick of primer coz the paint had peeled a bit from the brake fluid, when I stripped it down.

[Front Row Joe]

Has this been sold yet. If not can you post and what are the dimensions? Sorry i don't have a book. I'm very interested. Cheers Joe.

Originally Posted by dogwood

Here's the pic of the pedal box, as promised.
The MC hole is 34mm dia, and the bolt spacing is 90 mm.

It comes with the pushrod, that fitted my MC.
It also has the Dogwood patented clutch cable adjuster.
So you can use a standard Sierra clutch cable (Type9)

I've given it a lick of primer coz the paint had peeled a bit from the brake fluid, when I stripped it down.

[dogwood]

I'm afraid posting will be a prob, as I live in France.
The diamentions are to the book, I know you ain't got the book
But if you are building a Haynes Roadster then it will fit.
If you can wait till after Stonleigh (Assuming you aint going)
I could probably get it posted then. Cost would be about a tenner

HTH

[HandyAndy]

Thanks for the piccies & info David...............

the dimensions of my M/C is 40mm

never mind , thanks anyways .

I like the clutch cable curve guide

sorry for late reply....busy cutting 5 chassis kits that have to be done by stoneleigh weekend.

cheers
andy

[dogwood]

Originally Posted by HandyAndy

the dimensions of my M/C is 40mm
cheers
andy

I can soon take it out to 40mm

[dogwood]

Pedal box now provisonally sold to LCB member jonrotheray