#1
|
|||
|
|||
Another MX 5 Saturn based build
Myself and Kitch (Who I think is a forum member) are about to build two MX5 based roadsters based on the Saturn plans but with a few tweaks.
In the pictures you can see my design for the back end of the chassis which I believe will be far more solid than the original. This is to scale and uses the same pick up points as the saturn design. http://www.flickr.com/photos/66567276@N05/6708878431/ http://www.flickr.com/photos/66567276@N05/6708878127/ http://www.flickr.com/photos/66567276@N05/6708878613/ My car will be powered by a very low mileage 1.8 VVT engine producing 153bhp and my intention is to build a car weighing no more than 550kg, I'd initially wanted 500kg but the more I look into it the less likely it looks. We plan to make the 1st cut's this weekend so I'll keep you updated with any progress. Paul |
#2
|
||||
|
||||
Welcome to the forum and good luck with your build
|
#3
|
||||
|
||||
Welcome to the forum!
Should go quite nicely with that lump in it |
#4
|
|||
|
|||
Thanks guys! It should produce a theoretical 0 - 60 time of 4.2 seconds and 0 - 100 time of 11.3 seconds
A supercharger would get my 0 -100 down to 8.1 I'll have to start a proper build blog to keep you updated Paul |
#5
|
|||
|
|||
Welcome to the forum and good luck with the build
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
Thread Tools | |
Display Modes | |
|
|